Friday, September 7, 2012

Affix front threaded rods to frame triangles


  1. Affix a M8 nut and a M8 washer to the bar clamp rod of the Y-motor mount sub-assembly on the side with the 608zz bearing

  2. Repeat step 1 for the lower rod

  3. Slide the threaded rods into one of the footed vertices on one of the frame triangle

  4. Affix the Y-motor mount sub-assembly  to the frame triangle with M8 washers and nuts on both rods

  5. Repeat steps 1-4 for the remaining frame triangle, on the other side of the Y-motor mount sub assembly

Posted by at